EN-10
Programming Preset Stations
Search a station by Manual or Automatic Tuning. When the desired station and frequency is found, press the OK button, now
rotate the Volume knob to choose 1-6, press the OK button to confi rm and store the station. This sequence can be repeated for
every available BAND. Just press the BAND button to select the next available band and repeat the above sequence.
Selecting Preset Stations
Select the desired BAND. Now press the button or the button to choose the station.
AS (Auto Store) / PS (Preset Scan)
In Tuner mode, select an available BAND, then press the MEM button for longer than 2 seconds to enable the Auto Search
and Store function. The unit will search for stations of the selected frequency band and will store up to 6 stations into the preset
memory. The search will stop automatically when the whole frequency spectrum has been search, when the preset stations
are stored or when the MEM button is pressed again. PS: Press the MEM button shortly in the TUNER mode to scan the preset
stations in the memory of the current selected frequency band. Each preset station will be heard for 5 seconds. Press the MEM
button to stop the Preset Scan.
File / Folder Search
In MP3/USB/SD/CD mode: Press the MEM button to enter into the search mode (press the button in sequence to toggle
between the following search modes): FILE NUMBER → FILE NAME → FOLDER (Note: Audio CD discs only support Track
Number search mode)
Track number search
A “0” digit will blink in the LCD, Enter the track digits by turning the Volume button clock or counter clockwise. Press the Volume
button to enter the selected digit and confi rm by pressing the SEL button. Repeat this sequence until the wished track number
is displayed. Now press the OK button to start playing the desired track. If the track cannot be found, the last played track will
be played and the search function will be cancelled.
Track name search
In MP3/USB/SD/CD mode: Press the MEM button repeatedly to enter into the search track name mode. The character A *
* - - - - - will be displayed.
Enter the track characters by turning the Volume button clock or counter clockwise and toggle between “A” through “Z” and “0”
through “9”. Confi rm the blinking character by pressing on the SEL knob. Repeat this sequence until the wished characters are
displayed. Now press OK to start playing the desired track. When multiple fi les are found, toggle between the fi les by turning
the volume knob clock or counter clockwise, then press the OK button to confi rm the selected song. If the track cannot be
found, an error message will be displayed and thereafter A * * - - - - - and the fi le name search sequence can be repeated.
Folder search
In MP3/USB/SD/CD mode: Press the MEM button repeatedly until ROOT will be shown on the LCD, to enter the Folder Search
mode. ROOT will be displayed and if there are sub folders rotate the Volume knob to move to the subfolders and press the OK
button to enter the subfolder. The unit will now starts playing the songs from this subfolder.
To Next Page
Loading...