Sencor SMW 6002DS - Technical Specifications

Microwave oven
SMW 6002DS
BEFORE YOU CALL THE REPAIR MAN
If the microwave oven is not working:
1) Ensure that oven is properly connected to the electrical grid. If not, disconnect the power plug from
the electric power socket, wait 10 seconds and then reconnect it.
2) Check that a short circuit has not occurred causing the circuit breaker to shut off. If the above
mentioned points are in order, check the power socket using a different appliance.
3) Check that you have set the proper values on the control panel.
4) Check that the door is properly closed using the safety door locking system. Otherwise microwaves
will not be produced.
IF THE ABOVE MENTIONED STEPS DO NOT HELP, CONTACT A QUALIFIED REPAIR MAN. DO NOT ATTEMPT
TO MODIFY OR REPAIR THE MICROWAVE OVEN YOURSELF.
TECHNICAL SPECIFICATIONS
Nominal voltage range: mai 230 — 240 V
Nominalfre Uno. rai 50 Hz
Redi hira a ni ian a ak aa aka dag aaa aaa ya ahaaa aa a Ka a eg ag a aa aa a a Ega aa ga kaga al a aaa ae waga a aaa 1200 W
Microwave power OUtDUT rica 700 W
OPA 2450 MHz
DUIS WV Me hei anale i rea 63 dB(A)
Outside GIMENSIONS: ............ rr 452 mm (w) x 358 mm (d) x 262 mm (h)
Internal ane EE 315 mm (w) x 297 mm (d) x 198 mm (h)
corona 20 |
WV BUG ee, E approx. 10.5 kg
CL CIC Pre A ga aba Ka aaa aaa a a 24.5 cm
The declared noise emission level for this appliance is 63 dB(A), which represents level A of the acoustic
power relative to the reference acoustic power of 1 pW.
Included contents
Microwave oven
Rotating ring
Rotating glass plate
Amendments to text and technical parameters are reserved.
EN-13
Copyright © 2013, Fast CR, a. s. Revision 04/2013