EN-8
EN
Vacuum Cleaner
SVC 45BK / SVC 45BL / SVC 45GR / SVC 45RD / SVC 45WH
Copyright © 2014, Fast ČR, a.s. Revision 11/2014
Tip:
If the winding process stops and part of the power cord is still outside, release the winding
button and pull the cable out again by about 50 cm and press the winding button again and
repeat the winding process.
Carrying your vacuum cleaner
If you need to carry the vacuum cleaner, you can hold it by the handle or the holder.
STORAGE OF VACUUM CLEANER
Before storage you can disassemble your product into the individual parts or you can store it assembled
and lock the fl oor nozzle in the parking position.
CLEANING AND MAINTENANCE
Note:
Always remove the power cord from the power socket before cleaning.
Changing the dust bag
If while the suction hose is lifted above the vacuumed area and the power is set to maximum and the
full dust bag indicator seen through the clear window shows „full“ (full colour in the indicator) then it
is necessary to replace the dust bag:
1) Open the vacuum cleaner cover.
2) Remove the old dust bag from the plastic holder.
3) Insert a new one in the same position.
4) Close the vacuum cleaner cover.
D
1 Vacuum cleaner cover clip
2 Vacuum cleaner cover
3 Plastic dust bag holder
4 Dust bag
5 Outfl ow fi lter holder
6 Dust bag
7 Outfl ow fi lter
1
2
3
4
5
6
7
To Next Page
Loading...
Need help?
General
