Sencor SVS 1010WH - Technical Specifications

Vacuum Sealer
SVS 1010WH
Copyright © 2020, Fast ČR, a.s. Revision 04/2020
EN-10
EN
TECHNICAL SPECIFICATIONS
Rated voltage range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220−240 V
Rated frequency ...........................................................................................50 Hz
Rated power input ........................................................................................110 W
Electrical shock protection class ................................................................................II
Noise level. .............................................................................................75 dB(A)
Maximum vacuum pressure .............................................................................–0.8 bar
Compressor power .......................................................................................12l/min
Maximum roll and bag width ..............................................................................30 cm
The declared noise emission level of the appliance is 75dB(A), which represents alevel Aof acoustic power with
respect to areference acoustic power of 1pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
We reserve the right to change text and technical specications.