EN - 1
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled carefully. Here
are a few precautions:
● Do not immerse the unit in water.
● Do not clean the units with abrasive or corrosive materials. They may scratch the plastic
parts and corrode the electronic circuits.
● Do not subject the product to excessive force, shock, dust, temperature or humidity,
which may result in malfunctions, shorter life span, damaged batteries, and damaged
parts.
● Do not tamper with the units internal components.
Doing so will invalidate the warranty and may cause damage. These units contain no
user-serviceable parts.
● Use only fresh batteries. Do not mix new and old batteries.
● Read the User’s Manual thoroughly before operating the units.
INTRODUCTION
Thank you for selecting weather staiton with clock.
This device combines precise time keeping with monitoring and displaying of current
temperature and humidity conditions from up to 3 remote locations.
In this package you will find:
• One main unit (receiver)
• One remote sensor (transmitter)
• One User’s Manual
• One usb cable
• One screwdriver
• One AC adaptor
Please keep this manual handy as you use your new item. It contains practical step-by-step
instructions, as well as technical specifications and precautions.
PRODUCT OVERVIEW
MAIN UNIT
Features
● Low battery indicators
● Celsius and Fahrenheit exchangeable
● Can reciever temperature&humidity data (30 mater without barrier)
● Minimum and maximum memory for indoor and remote temperature&humidity
● Colorful led background
● 12/24 hour format selecting
● Alarm and snooze function
● Data, time, humidity, temperature display
● Long pressing “+/CH” 3 seconds, can reconnection remote sensor after Install new
battery
To Next Page
Loading...
