EasyManuals Logo

Sennheiser EM 100 G3 Specifications

Sennheiser EM 100 G3
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FEATURES
Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF
frequencies for interference-free reception
Enhanced frequency bank system with up
to 12 compatible frequencies
High-quality true diversity reception
Pilot tone squelch for eliminating RF inter-
ference when transmitter is turned off
Automatic frequency scan feature
searches for available frequencies
Enhanced AF frequency range
Wireless synchronization of transmitters
via infrared interface
User-friendly menu operation with more
control options
Illuminated graphic display
Auto-Lock function avoids accidental
changing of settings
HDX compander for crystal-clear sound
Receiver features transmitter battery
indicatation in 4 steps
Integrated Equalizer, Soundcheck mode
and guitar tuner
Wide range of accessories adapts the
system to any requirement
Optimized PLL synthesizer and micropro-
cessor technology
With its improved design and new features, this rugged G3 rack receiver is ready
for the road with its proven transmission reliability and inspiring flexibility. The
sound check mode allows you to check the audio and RF signal at any time during
setup. 20 frequency banks with 12 preset frequencies each, plus a user-program-
mable bank mean you can easily run multiple channels of G3 wireless simultane-
ously.
TECHNICAL DATA
Modulation ...............................................................wideband FM
Frequency ranges.................................................... 516 558, 566 608, 626 668,
734 –776, 780 822, 823 865 MHz
Receiving frequencies ............................................ 1,680 frequencies, tuneable in steps
of 25 kHz
20 frequency banks, each with
up to 12 factory-preset channels,
intermodulation-free
1 frequency bank with up to 12
user programmable channels
Switching bandwidth .............................................42 MHz
Nominal/peak deviation .......................................± 24 kHz/± 48 kHz
Receiver principle ....................................................true diversity
Sensitivity (with HDX, peak deviation) .............< 2 µV for 52 dBA rms S/N
Adjacent channel rejection ...................................typ. 65 dB
Intermodulation attenuation ...............................typ. 65 dB
Blocking .....................................................................70 dB
Squelch ...................................................................... Off, Low: 5 dBmV, Middle: 15 dBmV,
High: 25 dBmV
Pilot tone squelch ...................................................can be switched off
Antenna inputs........................................................2 BNC sockets
Compander system .................................................Sennheiser HDX
EQ presets
Preset 1: “Flat”
Preset 2: “Low Cut” ................................................−3 dB at 180 Hz
Preset 3: “Low Cut/High boost” .......................... −3 dB at 180 Hz
+6 dB at 10 kHz
Continued on page 2
EM 100 G3 Stationary receiver

Other manuals for Sennheiser EM 100 G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sennheiser EM 100 G3 and is the answer not in the manual?

Sennheiser EM 100 G3 Specifications

General IconGeneral
EqualizerYes
Product colorBlack
Handheld remote controlNo
Frequency range25 - 18000 Hz
Signal-to-Noise Ratio (SNR)110 dB
Total Harmonic Distortion (THD)0.9 %
FM band range516 - 865 MHz
Dimensions (WxDxH)212 x 202 x 43 mm
Power requirements12 V DC
HDMI ports quantity0
I/O ports2 x BNC XLR 6.3mm
Connectivity technologyWired & Wireless
Headphone outputs1
Digital audio coaxial in-
Weight and Dimensions IconWeight and Dimensions
Weight900 g

Related product manuals