EasyManua.ls Logo

Sennheiser Set 810 - Adjusting Volume and Bass Response

Sennheiser Set 810
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
English
Adjusting the max. volume:
Potentiometer turned fully counterclockwise 0 dB
Potentiometer turned fully clockwise 125 dB
Adjusting the bass response:
Potentiometer turned fully counterclockwise attenuation of -25 dB at 100 Hz
Potentiometer turned fully clockwise attenuation 0 dB
The adjustments can also be made when the receiver is
being used.
When replacing the operating control, make sure the
"projections" on the inside of the operating control point in
the direction of the earbows.
After replacing the operating control, synchronize the
operating control with the volume control by once turning it
fully counterclockwise and then fully clockwise.
set 810_93286_0106_Sp7.book Seite 16 Donnerstag, 19. April 2007 4:29 16

Other manuals for Sennheiser Set 810

Related product manuals