1. Press SET.
2. Press PHONE NUMBER.
3. Press any unassigned number key (from 1 to 4) to represent
the new telephone number entry. Model 1104 will respond:
“Enter number.”
4. Enter the telephone number using the number keys. The
Model 1104 will recite the digits as they are pressed.
5. Position the pound (#) or asterisk (*) within the telephone
number where required by pressing SET (where the pound is
located) or WHAT IS (where the asterisk is located). The
Model 1104 will “beep” each time pound or asterisk is
pressed.
–OR–
6. Enter any remaining digits of the telephone number.
7. Press ENTER. The Model 1104 will say “Enter.”
To Next Page
Loading...