Sensaphone 1104 - Programming Power Failure Recognition Time

power failure alarm may also be cancelled remotely, by telephone
acknowledgment (see Chapter 6, Section 6.1).
5.9.1 Programming Power Failure Recognition Time
1. Press SET.
2. Press RECOGNITION TIME.
3. Press POWER. The Model 1104 responds: “Enter minutes.”
4. Using the number keys, enter the number of minutes. The
Model 1104 will recite the digits as they are pressed.
5. Press ENTER. The Model 1104 responds: “Enter seconds.”
6. Using the number keys, enter the number of seconds. The
Model 1104 will recite the digits as they are pressed.
7. Press ENTER. The Model 1104 responds: “OK.”
ENTER
TONE
PM
ENTER
TONE
PM
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
ENTER
TONE
PM
ENTER
TONE
PM
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
0
ID NUMBER
POWER
7
RECOGNITION
TIME
SET
#
Chapter 5: Alarm Programming
75