Sensitech TempTale RF Setup Instructions

Hardware Configuration Instructions
for TTRF Infrastructure
 SENSITECH INC
REV A 9/6/2005
9
LED Patterns
The TTRF Gateway’s Red LED (DS4) will blink the following pattern:
1 second on
1 second off
n 0.5 second interval blinks indicating channel n. (Note: will be 1 flash for channel 1)
1 second off
The TTRF Repeater/Signpost’s Red LED (DS4) will blink the following pattern:
0.33 second blink rate: Functioning as a Repeater, bound to a specific Gateway.
1 second blink rate: Functioning as a Signpost.
2 second blink rate: Neither a Repeater nor a Signpost, actively scanning channels
for the beacon from a TTRF Gateway.

Sensitech TempTale RF Specifications

General

Brand	Sensitech
Model	TempTale RF
Category	Measuring Instruments
Language	English