Need help?Do you have a question about the Sentex MINI-KEY and is the answer not in the manual?
Emphasizes grounding to prevent damage from static discharge to sensitive components.
Recommends a dedicated circuit breaker for the transformer to ensure stable power.
Details the correct procedure for connecting wires to terminal blocks securely.
Advises users to carefully read circuit board markings before making connections.
Details connecting the 2-conductor cable for system power to the transformer.
Explains connecting door strikes and gate operators to terminal block TB1.
Details wiring for magnetic locks, including diode installation for surge protection.
Describes connecting gate operators using dry contact closure to TB1.
Explains connecting devices like exit buttons to activate relays.
Details connecting a timer or clock with a floating contact closure.
Instructions for installing a remote keypad and connecting its data and power.
To Next Page
General