8. Scan your QR Code (found on the device or in the installation manual)
9. Input the name of the boat. Before boat’s data can be received you need to activate the Sentinel Boat Monitor
2. Installation Guide
Selecting a correct installation spot is essential for optimal device performance.
The BM-50 is primarily designed for wall mounting. Connectors should always face down (towards the ground) as
shown in figure to achieve optimal positioning accuracy with built-in antennas. Unless an external GPS antenna
with extension cable (optional, not included) is used, other orientations of the device will cause poorer satellite
reception and will lower the positioning precision. The sky view above the device or GPS antenna with extension
cable should not be obstructed with any metal objects, pipes or conductors.
The BM-50 device should be installed in a dry location away from direct contact with water and should not be
exposed to direct sunlight. Operating temperatures above 50 degrees Celsius may lead to irregular operation and
damage to internal components of the Boat Monitor. It is important to follow these guidelines to ensure the proper
functioning and longevity of the BM-50 device.
To Next Page
Loading...