Sentry AutoVREL - Accessories List; Standard Warranty

18 Sentry Equipment Corp
Accessories List
Description Part Number Comment
TSV 7-01137E
TSV switch 4-05144A
AC power cord 4-03624B
Installation kit 6-05790C
Retrot kit 6-05889A use when upgrading**
Seal kit 6-05889B use when replacing seals
Power supply* 4-05938H 80 W for up to 1 unit
Power supply* 4-05938F 240 W for up to 3 units
Power supply* 4-05938P 480 W for up to 8 units
* When sizing power supplies, use 72 W for a single AutoVREL controller. Use (n + 1) x 50 W for any number
(n)>1.
** Use the retrot kit to upgrade an existing VREL valve from a 7-00744A to 7-00744K. This is necessary for proper
AutoVREL ow controller function.
Standard Warranty
Sentry Equipment Corp (“Seller”) warrants products manufactured by it and supplied
hereunder (“Products”) to be free from defects in workmanship and, to the extent
materials are selected by Seller, to be free from defects in materials, in each case for a
period as de ned in the table below:
Product Line Product Category Warranty Period
Sentry® 1. Automatic Sampling
2. Corrosion Monitoring
3. Manual Sampling
4. Sample Conditioning
5. Sampling & Analysis Systems
6. Replacement Parts (without expiration dates)
Eighteen months
from date of
shipment or twelve
months from
startup, whichever
occurs  rst
Waters
Equipment
1. Sampling & Analysis Systems
2. Replacement Parts (without expiration dates)
Twelve months from
date of shipment
To view the full warranty, go to
www.sentry-equip.com/warranty.