Sentry360 FS-IP3000-M - Camera Connectors and Controls; Component Identification

1.5 Connectors
The diagram below shows the FS-IP3000-M reset button and various adjusting screws.
Definition for each will be given as follows.
Designation
Description
1
Reset Button
Restore to default setting;
press the button with a proper tool
2
Lens
Rotate the lens right/left to adjust focus
3
Focus Fixed Screw
Loosen the screw to adjust the lens
4
Tilt Fixed Screw
Loosen the screw to adjust tilt angle
5
Micro SD Card Slot
For video recording storage