Chapter 1
Introduction
This section provides information about the OC835-ADT Outdoor Day/Night HD
Camera's features, components and capabilities.
Overview
The OC835-ADT is a true outdoor day/night wireless camera with HD resolution,
802.11n Wi-Fi connectivity and Wi-Fi Protected Setup (WPS) support. This
camera is intended for use with ADT Pulse
®
.
Features
x Standalone Design. The camera is a standalone system with built-in CPU
and video encoder. It requires only a power source and a connection to the
ADT Pulse Gateway or ADT Total Security (TS) Base panel.
x Dual Video Support. The OC835-ADT supports H.264 and MJEPG video
compression.
x Day/Night Switch: With the day/night switching feature, you can view and
record images even at night.
x IR LED Support. The infrared LED can provide illumination for up to 6 meters,
providing superior video quality under low-light conditions such as on cloudy
days, or in the early morning or evening.
x PIR (Passive Infrared Sensor) Support. The embedded PIR Sensor senses
infrared light radiating from human bodies in its field of view.
x Built-in Heater. The built-in heater ensures that the camera will continue to
operate even in extremely cold outdoor climates. The heater turns on when
the temperature falls below 42qF (6qC).
Wireless Features
x Supports 802.11n Wireless Standard. The 802.11n standard provides
backward compatibility with the 802.11b and g standards.
x Supports WPS. Wi-Fi Protected Setup (WPS) can simplify the process of
connecting the Wireless HD Camera to the wireless network by using the push
button configuration.
x Wired and Wireless Network. The OC835-ADT can be connected to the
Pulse network wirelessly. It can also be hardwired to the network.
1
OC835-ADT Outdoor HD Camera Installation Guide 3
To Next Page
Loading...
