Sercomm OC835-ADT - Wireless Connection to TS Base (WPS)

Chapter 3 ADT Pulse Enrollment
Wireless Connection to the TS Base Using the Installer App
Note: In ADT Total Security (TS) Systems, the gateway is integrated with the TS
Base panel and is not a separate device.
1.
Install and configure the camera, as described in the previous chapter.
2.
Launch an Internet browser from a computer and log in to the Installer App.
3.
Select Pulse Devices.
4.
Click Cameras.
OC835-ADT Outdoor Day/Night HD Camera Installation Guide 17