Sercomm RC8221V2 - Network Camera HTTP CGI Commands; User-Level CGI Command Reference

112
Byte 5,6 in block: Current threshold of the detected window,
word type
0 ~ 65535, currently use only 0~255
Byte 7,8 in block: Current sensitivity of the detected
window, word type
0 ~ 65535, currently use only 0~10, 10 is
the most sensitive.
0x02 Input I/O Ports Padding, in video frame
The data length is 2.
Byte 1: The Input port 1 is triggered or not..
and whether it is in the effect schedule or not..
0x00 = 0 = Off
0x01 = 1 = On & Triggered & not in effect schedule
0x11 = 17 = On & Triggered & in effect schedule
Byte 2: The Input port 2 is triggered or not..
and whether it is in the effect schedule or not..
0x00 = 0 = Off
0x01 = 1 = On & Triggered & not in effect schedule
0x11 = 17 = On & Triggered & in effect schedule
0x03 PIR sensor Padding, in video frame
The data length is 1.
Byte 1: The PIR sensor is triggered or not..
and whether it is in the effect schedule or not..
0x00 = 0 = Off
0x01 = 1 = On & Triggered & not in effect schedule
0x11 = 17 = On & Triggered & in effect schedule
0x04 Audio Volume Detection Padding, in audio frame
The data length is 2.
Byte 1: Audio Volume detection is enabled or not (main switch)
and whether it is in the effect schedule or not..
0x00 = 0 = Off
0x01 = 1 = On & not in effect schedule
0x11 = 17 = On & in effect schedule
Byte 2: Current audio volume level
0 ~ 100
0xBF End-Of-Padding
The data length is 0. There's no additional padding after this command
(0xBF00).