Introduction
DynaDrive 1525-BRS - User Guide Page 4
1. Introduction
This information manual provides the product specifications, wiring diagram, operational modes
(torque and velocity) and troubleshooting procedures for the brush DynaDrive 1525-BRS.
1.1 Description
The DynaDrive 1525-BRS supplies 15 amps continuous current and 25 amps peak current at 164
VDC for a total of 2460 watts of continuous power. The DynaDrive is a current source type
PWM amplifier.
The DynaDrive is a power duplicator of the command signal. A battery, a motion controller, or a
signal generator can be the source of the command signal input.
Please read this manual thoroughly to the end as it contains important system information
and warnings.
To Next Page
Loading...