Page 5 of 12
Nameplate indicates the actual situation of each MFC (or MFM) channel when flow readout box connected with
MFC (or MFM), for example the full scales and flow units.
5. INSTALLATION & CONNECTION
5.1 Dimension ( Figure 4.)
设定
阀
控
清
洗
关
闭
调零
MFC1
调零
清
洗
阀
控
关
闭
设定
MFC2
D08-2D/ZM 流量显示仪
北京七星华创电子股份有限公司
电源
通
Note: Dimensions are in mm.
5.2 MFC Connection
For the pin configure of MFC “D” connector, please refer to Table 2.
Table2. MFC “D” connector diagram
Figure 4. Chassis Dimension
To Next Page
Loading...