SEVERIN KA4813 - Cleaning and Maintenance; Post-Brewing Cleaning; Daily Cleaning Routine

30
GB
7.1 After brewing
1. Make sure that brewing has nished and the appliance has cooled
down.
2. Press the “OPEN” button
11
on the side of the appliance to open the
swing-out lter
4
.
3. Remove the lter ring
1
.
4. Take out the lter insert
3
together with the permanent lter
2
or
disposable coffee lter.
5. Empty the coffee grounds out of the permanent lter
2
into the house-
hold waste or throw the disposable coffee lter together with the coffee
grounds into the household waste.
6. Rinse out the lter insert
3
and permanent lter
2
under owing
water.
7. Allow the lter insert
3
and permanent lter
2
to dry before placing
back into the appliance.
7.2 Daily cleaning
1. Make sure that the appliance is switched off, has cooled down and the
power plug
8
is disconnected.
2. Press the “OPEN” button
11
on the side of the appliance to open the
swing-out lter
4
.
3. Remove the lter ring
1
.
4. Take out the lter insert
3
together with the permanent lter
2
.
5. Wash the lter insert
3
and the permanent lter
2
in warm water
containing washing up liquid.
TIP
The lter ring
1
, permanent lter
2
and lter
insert
3
as well as the coffee jug
5
can also be
cleaned in the dishwasher.
6. Wipe the swing-out lter
4
with warm water containing washing up
liquid.
7. Empty the coffee jug
5
.
8. Wash the coffee jug
5
in warm water containing washing up liquid.
9. Wipe the hotplate
7
with a damp cloth.
10. Thoroughly dry all components before placing them back in the appli-
ance.