- 17 -
Restore Default Angle
Turn OFF the unit; then press preset buttons 1-6 and power the unit back ON. The
monitor should display ‘MOTOR ALGN OK”. Press the OPEN button and insert a CD.
The motor and gear drives are now back to their factory positions.
DVD/VCD/CD/MP3 OPERATIONS
Inserting disc
Press EJECT button, the front panel will slide down to
Position 1; then insert a disc into the Disc Loading Slot;
the panel will slide back automatically.
Ejecting a Disc
Press EJECT button, the front panel will slide down to Position 1; then eject
a disc; the panel will slide back automatically after 30 seconds , if no action is taken.
Note: The EJECT button on the remote control will perform the same functions.
Play/Pause
Press the PLAY/PAUSE button to play or pause the disc.
Stop
During movie playback, press the STOP button once; the DVD player memorizes the
location where you stopped (press PLAY button to resume playing from the
memorized location).
If you press the STOP button twice, the playback will start from the beginning of the
disc when you press again on the PLAY button.
F.FWD/F.REV
Press the F.FWD/F.REV button to select fast forward / reverse search. Press F.FWD/
F.REV on the remote control performs the same operation. Press PLAY/PAUSE to
resume to normal playback.
To Next Page
Loading...