Care recommendations
Follow the care recommendations below to maintain full operation of device and to fulfill the warranty
obligations.
This device must not be operated with covers or lids removed.
Do not drop, knock or shake the device, rough handling beyond the specification may cause damage to
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device.
Do not paint the device. Paint can clog the device and prevent proper operation.
Do not expose the device to any kind of liquids (rain, beverages, etc). The device is not waterproof. Keep the
device within the specified humidity levels.
Do not use or store the device in dusty, dirty areas, connectors as well as other mechanical parts may be
damaged.
If the device is not working properly, contact the place of purchase, nearest Sevio distributor office or Sevio
technical support.
Note: Do not use damaged equipment and/or accessories such as damaged power cord.
Note: Do not open the device. There are no serviceable parts inside.
Note: Product warranty gets void and any liability will be disclaimed when opening the device.
Note: Never unplug equipment from the electrical outlet by holding the cord only, always disconnect the
cable by applying force directly to the plug.
Symbols
CE marking, the product complies with the requirements of the applicable EU directives.
Direct current, DC
This symbol means that the product shall not be treated as unsorted municipal waste when
disposing of it. It needs to be handed over to an applicable collection point for recycling electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help to reduce
hazardous substances and prevent potential negative consequences to both environment and
human health, which could be caused by inappropriate disposal.
Document ID: basic_installation_guide_en 6
https://sevio.it/
To Next Page
Loading...
