Electrical installation
Power supply
Power the router through the connector at the bottom of the device, as shown in the figure.
The device is protected against polarity inversions.
Symbol Direction Description
+ Input Power supply
CHA Input Chassis ground
- Input Power Ground
Power connector MC 1.5/3-STF-3.81 with screws block
Min. Max.
Voltage +8 V DC +30 V DC
Input current 0.171 A 0.54 A
Power 5.13 W
Note: The equipment shall be supplied by ES1/SELV power source according to IEC/EN 60950-1 or IEC/EN
62368-1, protected by a 2 A fuse.
Document ID: basic_installation_guide_en 11
https://sevio.it/
To Next Page
Loading...
