Document ID: sv_secure_local_access_en_v18_04
https://sevio.it 5
2 Configuration
This chapter describes the configuration procedures of many operating systems. Does not precluding the
operation of other no-mentioned operating system, as long as support the VPN Client Protocol.
2.1 Sevio Portal
Sevio Portal, the web application for the Sevio system, can be used to configure and view the status of the
devices that are part of the Realm, for more detailed information please refer to the User Guide.
To enable Secure Local Access feature:
Through Sevio Portal log into
Devices section and select the
Sevio router.
Set up a static IP for Sevio Router
on the WAN network, 192.168.1.50
in the example.
NOTE: The WAN static IP address is
necessary to configure the Local
Control Station. Therefore do not
use DHCP Client to avoid the
automatic IP address modification.
To Next Page
Loading...
