Why is oil leaking from the breather valve on my SEW-Eurodrive Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive KF97 Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive KF97?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive KF97 Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | KF97 |
| Category | Industrial Equipment |
| Language | English |
Covers general safety aspects for geared motors and gear units.
Defines the intended industrial system applications for these units.
Specifies conditions and requirements that must be met before starting installation.
Provides instructions on how to mount the gear unit onto a support structure.
Guides on installing and removing shaft-mounted units using keys or splines.
Details the procedure for installing and removing gear units using shrink discs.
Startup notes for helical-worm and Spiroplan® W gear units, including running-in.
Identifies common gear unit problems, their possible causes, and remedies.
Step-by-step instructions for checking and changing oil levels and oil.
Provides recommended lubricant fill quantities for different gear units and mounting positions.
To Next Page