Why is oil leaking from the breather valve on my SEW-Eurodrive Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive KH167?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive KH167?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | KH167 |
| Category | Industrial Equipment |
| Language | English |
Explains hazard symbols like electrical, imminent danger, dangerous situation, and damaging situation.
Covers general safety, designated use, transportation, storage, startup, and operation safety measures.
Check rotation, secure keys, and address operational anomalies promptly.
Illustrates the basic structure and components of Helical, Parallel Shaft Helical, Helical-Bevel, Helical-Worm, and Spiroplan gear units.
Covers tools, pre-installation checks, preliminary work, and breather valve activation.
Details mounting solid shafts, torque arms, key/spline units, shrink discs, and adapter couplings.
Covers running-in periods for specific types and general startup notes for others.
Lists common gear unit problems, their possible causes, and remedies.
Details inspection periods, lubricant schedules, and oil level check/change procedures.
Introduces mounting positions and details helical gear unit configurations.
Details mounting positions for Parallel, Helical-Bevel, and Helical-Worm gear units.
Explains lubricant types, bearing greases, and provides fill quantity tables for various gear unit series.
Lists addresses for SEW-EURODRIVE offices worldwide.
To Next Page