To Next PageTo Next Page
Need help?Do you have a question about the SEW-Eurodrive R17 DRS71S4 and is the answer not in the manual?
General| Motor Poles | 4 |
|---|---|
| Frequency | 50 Hz |
| Category | Industrial Equipment |
| Voltage | 400 V |
| Ambient Temperature | +40°C |
Guide on how to effectively use the documentation for operation and service.
Explains safety note structure, signal words, and warranty claims.
Covers liability exclusion, product names, trademarks, and copyright.
Introduction to safety notes and essential general warnings for gear units.
Defines qualified personnel, intended use, and references other manuals.
Guidelines for safe transport, storage, startup, operation, and maintenance.
Exploded views and component lists for helical and parallel-shaft helical gear units.
Exploded views and component lists for K..9 and K..37-K..187 helical-bevel units.
Exploded views and component lists for helical-worm and SPIROPLAN® gear units.
Explanation of the gear unit nameplate and type designation system.
Lists tools, tolerances, and requirements before starting mechanical installation.
Steps for mounting the gear unit and details on various shaft mounting types.
Covers torque arms, shrink disks, TorqLOC®, protective covers, and AM/AQ adapters.
Assembly of AD input shafts and overview of general accessory equipment.
Essential checks and precautions before starting up the gear unit.
Procedures for checking oil level and understanding pseudo-leakage at shaft seals.
Covers startup for specific gear types, backstops, and elastomer components.
Notes before inspection/maintenance and obligatory intervals for checks and replacements.
Guidance on lubricant change intervals and technical data for greases.
Inspection/maintenance procedures for adapters and the gear unit itself.
Detailed steps for checking and changing oil via various methods.
Procedures for replacing oil seals and painting the gear unit.
Defines mounting positions (M1-M6) and explains churning losses.
Detailed diagrams and notes for mounting positions of Helical, Parallel-shaft Helical, Helical-bevel, and Helical-worm gearmotors.
Diagrams and notes for mounting positions of SPIROPLAN® W gearmotors.
Conditions and durations for extended storage of gear units in different climates.
Recommended lubricants, bearing greases, and fill quantities for various gear unit types.
Comprehensive table of permitted lubricants and key to abbreviations used.
Tables detailing recommended lubricant fill quantities by gear unit type and mounting position.
Lists common gear unit malfunctions, their causes, and recommended remedies.
Identifies malfunctions related to AM/AQ/AL/EWH adapters and their solutions.
Troubleshooting AD input shaft assemblies and information for customer service.
Instructions for the proper disposal of gear units and their components.
Contact details for SEW-EURODRIVE locations in Germany and France.
Contact details for SEW-EURODRIVE locations in Argentina, Australia, Austria, Belgium, Brazil, etc.
Contact details for SEW-EURODRIVE locations in China, Colombia, Croatia, Denmark, Egypt, Estonia, etc.
Contact details for SEW-EURODRIVE locations in Poland, Portugal, Romania, Russia, Senegal, Slovakia, etc.
Contact details for SEW-EURODRIVE locations in Slovenia, South Africa, South Korea, Spain, Sweden, etc.
Contact details for SEW-EURODRIVE locations in Switzerland, Tanzania, Thailand, Turkey, UAE, USA, etc.
Contact details for SEW-EURODRIVE locations in Venezuela, Vietnam, and Zambia.
