Why is oil leaking from the breather valve on my SEW-Eurodrive R67?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive R67?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | R67 |
| Category | Industrial Equipment |
| Language | English |
Covers safety aspects of moving parts, hot surfaces, and required qualifications for work.
Illustrates the fundamental components and structure of a helical gear unit.
Details the components and assembly of a parallel shaft helical gear unit.
Explains the design principles and components of a helical-bevel gear unit.
Illustrates the structural elements of a helical-worm gear unit.
Presents the fundamental design and components of a Spiroplan gear unit.
Conditions to be met before starting the installation process.
Details on mounting input and output elements onto solid shafts.
Steps for installing shaft-mounted gear units using keys or splines on customer shafts.
Procedures for installing and removing gear units using shrink disc technology.
Diagnosing and resolving common gear unit problems like noise and oil leaks.
Procedures for checking oil levels, oil consistency, and changing the oil.
To Next Page