Why is oil leaking from the breather valve on my SEW-Eurodrive Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive RF47?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive RF47?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
Explains hazard symbols and their implications for safety.
Outlines general safety rules for handling and operation of gear units.
Safety guidelines for installation, operation, and maintenance procedures.
Guides on correctly mounting the gear unit onto a support structure.
Procedures for mounting input/output elements on solid shaft units.
Instructions for installing torque arms on shaft-mounted gear units.
Explains the running-in process and power reduction for specific gear units.
Lists common gear unit problems, causes, and remedies.
Provides guidance on lubricant replacement and oil level checks.
Details recommended oil fill quantities and bearing greases.
General| Gearbox Type | Helical Gearbox |
|---|---|
| Type | RF47 |
| Size | 47 |
| Ambient Temperature | -20°C to +40°C |
| Output Shaft | Solid Shaft |
| Input Options | IEC adapter, NEMA adapter |
| Protection Class | IP55 |
To Next Page