Why is oil leaking from the breather valve on my SEW-Eurodrive Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive RF37 Industrial Equipment?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
Details safety symbols, general warnings, and notes for safe operation.
Covers preliminary remarks, general safety, designated use, transport, installation, startup, operation, and maintenance.
Details the process of mounting gear units, including support structures and bolt quality.
Explains gear unit venting procedures and painting guidelines.
Covers installing input/output elements on gear units with solid shafts.
Details the process of installing/removing shaft-mounted units using key or splines.
Explains the procedure for installing and removing gear units with shrink discs.
Specific startup notes and running-in periods for helical-worm and Spiroplan units.
Lists common gear unit problems like noise and oil leaks with their possible causes and remedies.
Details how to check and change the gear unit oil, including safety precautions.
Lists approved lubricants for SEW gear units, with detailed specifications.
General| Gearbox Type | Helical Gearbox |
|---|---|
| Type | RF |
| Size | 37 |
| Ambient Temperature | -20°C to +40°C |
| Protection Class | IP55 |
| Efficiency | Up to 96% |
To Next Page