Why is oil leaking from the breather valve on my SEW-Eurodrive R107 Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive R107?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive R107 Industrial Equipment?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive R107?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
Illustrates the design principles and components of a helical gear unit.
Details the design principles and components of a parallel shaft helical gear unit.
Shows the design principles and components of a helical-bevel gear unit.
Explains the design principles and components of a helical-worm gear unit.
Illustrates the design principles and components of a SPIROPLAN® gear unit.
Covers mounting position, support structure, bolt quality, and accessibility of oil check screws.
Discusses the running-in period and power reduction for these gear unit types.
Provides a table of common gear unit problems, their possible causes, and remedies.
Provides detailed steps for checking and changing oil, including safety precautions.
General| Series | R |
|---|---|
| Gearbox Type | Helical |
| Mounting | Foot-mounted |
| Power Rating | 0.12 ... 200 kW |
| Output Torque | Up to 18, 000 Nm |
| Input Speed | Up to 3, 600 rpm |
| Weight | Varies by model |
To Next Page
