EasyManua.ls Logo

SEW-Eurodrive RX67 - User Manual

SEW-Eurodrive RX67
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
04/2000
Gear Units
R..7, F..7, K..7, S..7 Series, Spiroplan
®
W
Edition
05/2001
Operating Instructions
10503013 / EN

Questions and Answers

  • C
    christopher58Aug 9, 2025
    Why is oil leaking from the breather valve on my SEW-Eurodrive RX67 Industrial Equipment?
    • C
      Courtney HoganAug 9, 2025
      If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
  • D
    Dr. Tami FrancisAug 17, 2025
    How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
    • W
      William RodriguezAug 17, 2025
      An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
  • C
    Christopher HayesAug 25, 2025
    What causes unusual irregular running noise in SEW-Eurodrive RX67?
    • D
      Desiree ChavezAug 26, 2025
      An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
  • K
    Kaitlyn CabreraAug 31, 2025
    Why is the output shaft not rotating on my SEW-Eurodrive RX67 Industrial Equipment?
    • R
      Ronald SmithAug 31, 2025
      The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.

Summary

Safety Notes and Precautions

General Safety Information

Details about moving parts, hot surfaces, and qualifications for handling.

Mechanical Installation Guide

Required Tools and Materials

Lists necessary tools, materials, and mounting tolerances for installation.

General Gear Unit Mounting

Guidance on mounting gear units, flange connections, and load considerations.

Solid Shaft Installation

Procedures for mounting input and output elements onto solid shafts.

Startup and Initial Operation

Troubleshooting Common Issues

Gear Unit Problems and Remedies

Lists common gear unit problems, their possible causes, and remedies.

Inspection and Maintenance Procedures

Gear Unit Oil Level and Change Procedures

Detailed steps for checking and changing gear unit oil, including safety.

Mounting Position Guidelines

Lubricants and Fill Quantities

Lubricant Fill Quantities

Tables showing recommended oil fill quantities for various gear units and mounting positions.

SEW-Eurodrive RX67 Specifications

General IconGeneral
SeriesRX
Size67
Mounting PositionFoot-mounted, flange-mounted, shaft-mounted
EfficiencyUp to 96%
Input OptionsIEC adapter, NEMA adapter
Protection ClassIP55
LubricationOil
CoolingNatural Convection

Related product manuals