Why is oil leaking from the breather valve on my SEW-Eurodrive Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive RX107 Industrial Equipment?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
Details safety and warning information, including hazard symbols and operational hints.
Lists essential tools, materials, and agents needed for the mechanical installation of gear units.
Instructions on mounting the gear unit, securing flanges, and ensuring accessibility of oil check screws.
Guidance on mounting input and output elements onto solid shafts, including correct arrangements.
Procedure for installing and removing shaft-mounted gear units using keys or splines.
Steps for installing and removing gear units with shrink disc, including tightening and removal notes.
Notes on changing direction of rotation and running-in periods for specific gear unit types.
Identifies common gear unit problems, their possible causes, and recommended remedies.
Defines the recommended time intervals for checking oil and performing maintenance tasks.
Detailed steps for checking and changing oil, including safety precautions.
Lists approved lubricants for SEW drives and explains abbreviations and notes.
General| Size | 107 |
|---|---|
| Output options | Solid shaft, hollow shaft |
| Series | RX |
| Input options | IEC motor, servo motor, hollow shaft |
| Protection class | IP65 |
To Next Page