Why is oil leaking from the breather valve on my SEW-Eurodrive R57?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive R57 Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive R57?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | R57 |
| Category | Industrial Equipment |
| Language | English |
Covers moving parts, hot surfaces, and qualified personnel for operation.
Guidance on correctly mounting the gear unit in its specified position.
Procedure for removing shaft-mounted gear units using the SEW kit.
Guidance on installing and removing shaft-mounted gear units with shrink discs.
Steps for installing AM adapter couplings for IEC and NEMA motors.
Specific installation steps for AM adapters on IEC motors.
Procedure for installing AQ adapter couplings with AQA and AQH designs.
Installation steps for the AD input shaft assembly.
Installation procedures for AD designs with centering shoulder or backstop.
Specific startup notes and running-in periods for helical-worm and Spiroplan® W gear units.
Table of problems, possible causes, and remedies for gear unit malfunctions.
Recommended periods for checking oil, replacing oil, and greasing bearings.
Procedure for checking and correcting the oil level in the gear unit.
Detailed steps for draining and refilling gear unit oil.
Diagrams showing mounting positions for helical gear units.
Diagrams showing mounting positions for RF17-RF167 gear units.
Diagrams showing mounting positions for R17F-R87F gear units.
Diagrams showing mounting positions for RX57-RX107 gear units.
Diagrams showing mounting positions for RXF57-RXF107 gear units.
Diagrams for parallel shaft helical gear units.
Diagrams showing mounting positions for FF series gear units.
Diagrams showing mounting positions for FA, FH, FV series gear units.
Diagrams for helical-bevel gear units.
Diagrams showing mounting positions for K167-187/KH167B-187B gear units.
Diagrams showing mounting positions for KF/KAF/KHF/KAZ/KHZ/KVF/KVZ gear units.
Diagrams showing mounting positions for KA/KH/KV series gear units (37-157).
Diagrams showing mounting positions for KH167-187 gear units.
Diagrams for helical-worm gear units.
Diagrams showing mounting positions for S47-S97 helical-worm gear units.
Diagrams showing mounting positions for SF/SAF/SHF37 gear units.
Diagrams showing mounting positions for SF/SAF/SHF/SAZ/SHZ47-97 gear units.
Diagrams showing mounting positions for SA/SH37 gear units.
Diagrams showing mounting positions for SA/SH47-97 gear units.
Detailed table of lubricants and their compatibility with gear unit types and temperatures.
Tables listing recommended oil fill quantities for various R.. and R..F gear units.
Tables listing recommended oil fill quantities for RF/RM gear units.
Tables listing recommended oil fill quantities for RX gear units.
Tables listing recommended oil fill quantities for RXF gear units.
Recommended oil fill quantities for F, FA, FH, FV series gear units.
Recommended oil fill quantities for FF series gear units.
Recommended oil fill quantities for K, KA, KH, KV series gear units.
Recommended oil fill quantities for KF series gear units.
Recommended oil fill quantities for KA, KH, KV series gear units.
Fill quantities for Spiroplan® gear units, independent of mounting position.
To Next Page