Why is oil leaking from the breather valve on my SEW-Eurodrive RXF97?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive RXF97 Industrial Equipment?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive RXF97 Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | RXF97 |
| Category | Industrial Equipment |
| Language | English |
Details on safety and warning symbols used in the publication and their implications.
Covers preliminary remarks, general safety, designated use, and transport/storage precautions.
Instructions for mounting gear units and geared motors, including bolt quality and placement.
Steps for installing and removing shaft-mounted gear units using keys or splines.
Instructions for installing and removing gear units using shrink disc technology.
Identifies common gear unit problems, their possible causes, and recommended solutions.
Detailed procedures for checking oil levels, oil consistency, and changing oil.
Diagrams showing mounting configurations (M1-M6) for helical gear units.
Diagrams illustrating mounting positions for parallel shaft helical gear units.
Diagrams showing mounting positions for helical-bevel gear units.
Diagrams illustrating mounting positions for helical-worm gear units.
To Next Page