Need help?Do you have a question about the SEW-Eurodrive MOVIDRIVE MDA90A-0240-503-X-S00 and is the answer not in the manual?
General| Series | MOVIDRIVE |
|---|---|
| Model | MDA90A-0240-503-X-S00 |
| Rated Output Current | 240 A |
| Rated Power | 110 kW |
| Input Frequency | 50/60 Hz |
| Protection Class | IP20 |
| Certifications | CE, UL, cUL |
| Input Voltage DC | Not Applicable |
| Product Type | Inverter |
| Nominal Voltage | 400 V AC |
| Cooling Method | Air Cooling |
| Storage Temperature | -25 to +70 °C |
| Relative Humidity | 95% non-condensing |
| Communication Interface | PROFIBUS DP, CANopen |
| Control Modes | Vector Control |
| Control Method | PWM |
| Input Voltage | 380-480 V AC |
Explains the grading and meaning of signal words for safety notes.
Outlines user responsibilities regarding safety notes and regulations.
Provides instructions for installing and assembling the product correctly.
Covers safety notes for starting up and operating the device.
Covers mechanical aspects of installation, including hole patterns and mounting.
Details the steps for installing modules within a control cabinet.
Provides safety notes and procedures for electrical installation.
Lists terminal assignments for various modules and connections.
Illustrates exemplary wiring configurations for power and electronics connections.
Outlines the steps for functionally dividing the startup process for the inverter.
Lists and describes faults related to the power supply module.
To Next Page