Need help?Do you have a question about the SEW-Eurodrive MOVIDRIVE MDA90A-0020-503-X-S00 and is the answer not in the manual?
General| Rated Output Current | 20 A |
|---|---|
| Power | 11 kW |
| Control Method | Vector Control |
| Communication Interface | PROFIBUS DP |
| Protection Class | IP20 |
| Certifications | CE, UL, cUL |
| Series | MOVIDRIVE |
| Input Voltage | 3AC 380-480 V |
| Output Voltage | 0-480 V |
| Ambient Temperature | -10°C to +40°C |
| Control Options | Encoder |
| Control Unit | MOVIDRIVE |
Explains the grading and meaning of signal words for safety notes.
Highlights that the product must not perform safety functions without a higher-level system.
Ensures installation and cooling according to regulations, protects from mechanical strain.
Ensures covers are attached, preventive measures comply with regulations.
Safety notes for startup, transport protection removal, connection boxes, and potential hazards.
Specifies tightening torques in Nm for screw connections for various modules.
Covers hole patterns, mounting grids, and dimensions for control cabinet installation.
Covers safety notes on dangerous voltages, PE conductor requirements, IT systems, and line fuses.
Information on installation, dangerous voltages, heat, and permitted mounting positions.
Illustrates exemplary power connections, electronics connections, and brake control wiring.
Details the segmented startup process using MOVISUITE® engineering software.
Lists subfaults for Fault 49, including description, response, cause, and measure.
Details faults for output stage, ground fault, brake chopper, line fault, DC link, speed monitoring, control mode, etc.
Details default fault responses and parameterizable faults with their possible responses and index numbers.
Provides performance data, electronics data for signal terminals, and general data for MDP modules.
Includes performance data, electronics data for signal terminals, drive safety functions, and module functionality differences.
Describes the safety technology, requirements, and safety concept for STO.
Mandatory requirements for approved devices, installation, external safety controllers, startup, and operation.
Presents characteristic values according to EN 61800-5-2 and EN ISO 13849-1 for tested safety classes.
To Next Page