Need help?Do you have a question about the SEW-Eurodrive MOVITRAC B MC07B0004-2B1-4-00 and is the answer not in the manual?
General| Model | MOVITRAC B MC07B0004-2B1-4-00 |
|---|---|
| Rated Power | 0.37 kW |
| Frequency Range | 0-400 Hz |
| Protection Class | IP20 |
| Communication Interface | RS-485 |
| Control Type | V/f control |
| Communication Interfaces | RS-485 |
Lists and describes the key functions and features of MOVITRAC® B inverters.
Covers general technical specifications applicable to all MOVITRAC® B inverters.
Details specific technical data for various MOVITRAC® B models and sizes.
Provides a comprehensive explanation of all available parameters for MOVITRAC® B.
Outlines the systematic steps for planning a drive project with MOVITRAC® B.
Guides through the process of selecting the appropriate motor for the application.
Provides guidance on selecting the correct braking resistor based on application needs.
Details requirements and recommendations for connecting the inverter to the mains and motor.
Provides general safety information and precautions for operating frequency inverters.
Provides essential notes and guidelines for the proper installation of MOVITRAC® B units.
Provides fundamental instructions and requirements for successfully starting up the drive.
Explains how to start the motor using analog setpoints or fixed setpoints.
Provides information about the unit, including error memory and switch-off responses.
Lists and explains various error codes, their possible causes, and measures.
Information on contacting SEW electronics service for support and repair.
To Next Page