Why is oil leaking from the breather valve on my SEW-Eurodrive SF37 Industrial Equipment?
If oil is leaking from the breather valve of your SEW-Eurodrive Industrial Equipment, it could be due to having too much oil. In this case, correct the oil level. Alternatively, the drive might be installed in an incorrect mounting position. To resolve this, fit the breather valve correctly and adjust the oil level.
How to troubleshoot unusual regular running noise in SEW-Eurodrive Industrial Equipment?
An unusual, regular running noise in your SEW-Eurodrive Industrial Equipment could be due to a meshing/grinding noise, indicating bearing damage. Check the oil and replace the bearing. Alternatively, a knocking noise might suggest an irregularity in the gearing.
What causes unusual irregular running noise in SEW-Eurodrive SF37?
An unusual, irregular running noise in your SEW-Eurodrive Industrial Equipment may be caused by foreign bodies in the oil. Check the oil.
Why is the output shaft not rotating on my SEW-Eurodrive SF37 Industrial Equipment?
The output shaft of your SEW-Eurodrive Industrial Equipment not rotating, even when the motor is running or the input shaft is rotating, indicates that the shaft hub connection is interrupted in the gear unit.
General| Brand | SEW-Eurodrive |
|---|---|
| Model | SF37 |
| Category | Industrial Equipment |
| Language | English |
Please note the safety and warning notes in this publication.
Dispose of housing parts, gears, shafts and anti-friction bearing of gear units as stell scrap.
Covers general safety, designated use, and transportation/storage.
Illustrations represent design principles for helical, parallel shaft, helical-bevel, helical-worm, Spiroplan units.
Covers preparation, general installation, specific types, and adapter couplings.
Explains torque arm installation and procedures for shaft-mounted units.
Specific startup notes for helical-worm and Spiroplan units, general notes for others.
Identifies common gear unit problems, their causes, and remedies.
Outlines inspection periods, tasks, and lubricant replacement.
Explains the six standard mounting positions (M1-M6) and provides diagrams for various gear unit types.
Lists approved lubricants, greases, and recommended fill quantities for gear units.
Provides a comprehensive list of SEW-EURODRIVE service and sales locations worldwide.
To Next Page