28
3 Operation
Note:
If the PIN code is set to 0000, you will not be
asked to enter the PIN code. The advanced
settings can then be accessed by anyone.
If you cannot access the Advanced settings area,
for example, if you have lost the PIN code, you must
contact SEWERIN Service.
Enter the PIN code from left to right. The active digit is always
displayed with a black background:
z Use the or key to select the rst digit.
z Conrm your selection with the key. The device jumps to
the second digit.
z Enter all digits of your code in sequence, conrming each entry.
If the PIN code has been entered correctly, the Info menu will
appear once the last digit has been conrmed:
adjustment
system
hardware
memory
exit
Otherwise the device will return to measuring mode.
To Next Page
