sewerin EX-TEC PM 4 - Page 48

39
3 Operation
Contrast
Contrast settings to facilitate
reading of the LCD (in approxi-
mately 30 increments).
Sensors
CAUTION!
Settings in the Sensors menu item may only be
congured by SEWERIN Service!
Gas type
Used to permanently change the
measuring medium.
Note:
The new gas type is not activated until the device
has been adjusted (and the adjustment has been
conrmed) (see Section 5.3).
0 – 100%
CH4
C3H8
C4H10
C6H14
C9H20
JFUEL
H2
TGAS
C2H2
PPM LEL VOL
PPM LEL
PPM VOL
PPM
LEL VOL
LEL
VOL