45
3 Operation
Autostart
Sets the application that is automatically activated when the de-
vice is switched on.
Gas type CxHy
Sets the gas type (methane CH
4
, propane C
3
H
8
, butane C
4
H
10
)
which is automatically used when the device is switched on.
Unit %LEL
Used to set the unit of measurement. Only applies to Warning
%LEL and Warning ExTox applications.
PPM multiplicator
Sets the amplication factor for the lower ppm range.
Measurement x factor = displayed measurement
Application: – Inspection above ground
Device inspection
Used to switch the integrated device inspection on or o.
Reset
Used to reset the device settings to the factory settings.
Language
Sets the language.
To Next Page
