56
5 Maintenance
Switching on the integrated device inspection
1. Press Menu.
2. Select Settings.
3. Enter your PIN code.
4. Select System.
5. Select Device inspection.
6. Select Yes.
7. Accept the setting with OK.
8. Exit the settings with Exit.
5.1.1.5 Order
You can carry out the device inspections and the associated
tests for the applications (groups) that are due to be inspected
in any order you wish. You can repeat the tests as often as you
wish provided you have not yet concluded the device inspection
for a group.
5.1.1.6 Test gases for the device inspection
The following variables depend on the application:
● Number of tests with test gas
● Test gases to be used
To Next Page
