sewerin VARIOTEC 480 EX - Protocols

37
3 Operation
Saving a measurement
1. Press Menu.
2. Select Save measurement from the menu.
3. Enter a comment for the measurement.
a) Select the characters required using the jog dial. Conrm
each character using the jog dial.
OR
− Press Open stored comments. A list of the stored com-
ments will appear.
− Select the desired comment. Open the comment with OK.
b) Then conrm your entry/selection with OK.
OR
Press Esc if you do not wish to enter a comment for the
measurement.
The measurement is saved as a protocol. The protocol name
is formed from the date, time and comment.
3.2.13 Protocols
You can retrieve or clear protocols of saved data under Protocol
in the menu. When saved, the protocols are assigned to di󰀨erent
protocol types.
The following protocol types are available:
● Ethane analysis
● Device inspection
● Measurements
Protocols can only be cleared individually.
You can nd information on how to clear all protocols in one pro-
tocol type in Section 3.3.7.