SGS GALSON - After Sampling; Seal Sample; Package for Shipment

Page 2 of 3
AFTER SAMPLING
1) Disconnect the sampler from pump tubing and replace the black cap back on the outlet of the
PPI. Place the provided sticker over the inlet of the PPI to seal the sample.
2) Place back in original sample bag and ship back to SGS Galson.
Questions? Contact SGS Galson 247/365 at 1-888-432-5227
PUMP-FORM-138 Ver:1 Appr/Eff Date:01/15/2021 - 01/15/2021 Approved By: CPIERCE