Need help?Do you have a question about the SGS SC100V and is the answer not in the manual?
Details technical specifications of the SC100V air compressor, including model, power, voltage, and dimensions.
Enumerate the items included with the air compressor package, such as the compressor itself and accessories.
Identifies key parts of the air compressor through a numbered diagram.
Details the pressure switch, regulating valve, and pressure gauges.
Covers manual reading, electrical shock, accidental start-up, hot surfaces, and water hazards.
Recommends safety goggles and ear protection for safe operation.
Covers training, eye/hearing protection, avoiding moving parts, and electric shock precautions.
Advises on suitable clothing and managing long hair to prevent accidents.
Covers visitor/child safety, cleanliness, hot parts, and air stream direction.
Emphasizes staying alert, avoiding alcohol/drugs, and not using for breathing air.
Covers disconnecting power, mains cable handling, and preventing accidental starting.
Details proper storage, qualified repair, and avoiding extension leads.
Advises environmentally friendly disposal and contacting local council for assistance.
Strictly prohibits welding or modifying the pressure vessel in any manner.
Instructions for attaching wheels using spanners and washers, and inserting the support foot.
Covers checking nuts/bolts, connecting breather pipe, and screwing in air filters.
Specifies setting the compressor in a clean, dry, ventilated area and checking voltage.
Guides on maintaining the oil level in the sight window and sourcing oil.
Details running the compressor for 10 minutes without load for initial lubrication.
Explains automatic stopping/restarting based on pressure and releasing air after shutdown.
Mentions that rated pressure is factory set but can be altered via the adjusting screw.
Describes the function of the right (reservoir) and left (outlet) pressure gauges.
Explains how to increase output pressure by turning the regulating valve knob clockwise.
Instructs to set the pressure switch to the OFF position to stop the running compressor.
Details venting the compressor and removing condensation by unscrewing the bleed nipple.
Stresses stopping power and discharging air before any maintenance operation.
Covers initial oil change, checking level, and replenishing lubricating oil.
Recommends periodic checks of safety valve and pressure gauges by certified centers.
Advises checking the air tank for rust and damage, and its thickness annually.
Steps for removing filter covers and the filters themselves from the compressor.
Details cleaning filters with a soft brush or soapy water, and drying them.
Ensuring correct reassembly and replacing damaged filters.
Checks for reservoir pressure decrease to identify potential non-return valve leaks.
Examines the non-return valve, replacing gasket and valve if necessary.
Explains the thermal reset switch as a safety feature protecting against overheating.
Guides on allowing the compressor to cool before reset and avoiding repeated restarts.
Covers motor problems, sticking parts, noise, and loose connections.
Addresses insufficient pressure, reduced capacity, and excessive oil consumption.
Details technical specifications of the SC100V air compressor, including model, power, voltage, and dimensions.
Enumerate the items included with the air compressor package, such as the compressor itself and accessories.
Identifies key parts of the air compressor through a numbered diagram.
Details the pressure switch, regulating valve, and pressure gauges.
Covers manual reading, electrical shock, accidental start-up, hot surfaces, and water hazards.
Recommends safety goggles and ear protection for safe operation.
Covers training, eye/hearing protection, avoiding moving parts, and electric shock precautions.
Advises on suitable clothing and managing long hair to prevent accidents.
Covers visitor/child safety, cleanliness, hot parts, and air stream direction.
Emphasizes staying alert, avoiding alcohol/drugs, and not using for breathing air.
Covers disconnecting power, mains cable handling, and preventing accidental starting.
Details proper storage, qualified repair, and avoiding extension leads.
Advises environmentally friendly disposal and contacting local council for assistance.
Strictly prohibits welding or modifying the pressure vessel in any manner.
Instructions for attaching wheels using spanners and washers, and inserting the support foot.
Covers checking nuts/bolts, connecting breather pipe, and screwing in air filters.
Specifies setting the compressor in a clean, dry, ventilated area and checking voltage.
Guides on maintaining the oil level in the sight window and sourcing oil.
Details running the compressor for 10 minutes without load for initial lubrication.
Explains automatic stopping/restarting based on pressure and releasing air after shutdown.
Mentions that rated pressure is factory set but can be altered via the adjusting screw.
Describes the function of the right (reservoir) and left (outlet) pressure gauges.
Explains how to increase output pressure by turning the regulating valve knob clockwise.
Instructs to set the pressure switch to the OFF position to stop the running compressor.
Details venting the compressor and removing condensation by unscrewing the bleed nipple.
Stresses stopping power and discharging air before any maintenance operation.
Covers initial oil change, checking level, and replenishing lubricating oil.
Recommends periodic checks of safety valve and pressure gauges by certified centers.
Advises checking the air tank for rust and damage, and its thickness annually.
Steps for removing filter covers and the filters themselves from the compressor.
Details cleaning filters with a soft brush or soapy water, and drying them.
Ensuring correct reassembly and replacing damaged filters.
Checks for reservoir pressure decrease to identify potential non-return valve leaks.
Examines the non-return valve, replacing gasket and valve if necessary.
Explains the thermal reset switch as a safety feature protecting against overheating.
Guides on allowing the compressor to cool before reset and avoiding repeated restarts.
Covers motor problems, sticking parts, noise, and loose connections.
Addresses insufficient pressure, reduced capacity, and excessive oil consumption.
General| Brand | SGS |
|---|---|
| Model | SC100V |
| Category | Air Compressor |
| Language | English |
To Next Page
