sharkclean.eusharkclean.eu
GETTING TO KNOW YOUR SHARK® AI ROBOT VACMOP
Charging Dock
DOCK FRONT
FLUID RESERVOIR
DOCK LANDING MAT
(This side up)
DOCK BOTTOM
Charging Contacts
Fill Port
Pad Slot
Removal Buttons
Charger Cord Wrap
DOCK SETUP
INSTALLING THE SIDE BRUSHES
Snap the 2 included Side Brushes onto the square
pegs on the bottom of the robot.
1.6m
1m
1m
• Select a permanent location with strong Wi-Fi for the Charging Dock, because every time you relocate it,
your robot will have to completely re-map your house.
• Place the dock with its back against a wall and attach the landing mat. Select a level surface on bare floor,
in a central area. Do not place dock against baseboards or heating elements.
• Remove any objects that are closer than 1m from either side of the dock, or closer than 1.6m from the front
of the dock.
• Plug in the dock. The indicator light will illuminate green when the dock has power.
ENGLISH