To Next PageTo Next Page
Need help?Do you have a question about the Shark IQ ROBOT and is the answer not in the manual?
General| Type | Robot Vacuum |
|---|---|
| Self-Emptying | Yes |
| Wi-Fi Connectivity | Yes |
| App Control | Yes |
| Recharge and Resume | Yes |
| Battery Life | Up to 90 minutes |
| Voice Control | Yes |
| Charge Time | 3 hours |
| Filter Type | HEPA |
| Dimensions | 3.5 inches |
Download the SharkClean app to stay current on the latest updates and features.
Clear cords and remove small objects. Open interior doors for cleaning access.
Use BotBoundary strips to block areas like power cords or high thresholds.
Remove protective film, attach side brushes, and power on the robot.
Place the base against a wall with good Wi-Fi, ensuring clear space around it.
Plug the base into an outlet and ensure its power switch is ON.
Charge the robot on the base for 6 hours with the power button ON.
Do not pick up or move the robot or base while cleaning to maintain mapping accuracy.
Run the robot frequently to improve its interactive map for better cleaning results.
Run the robot in well-lit conditions for optimal navigation, especially at night.
Block high thresholds with BotBoundary strips if the robot cannot climb them.
Download the SharkClean app and set up your account.
Hold Dock and Clean buttons simultaneously until the Wi-Fi light blinks.
Exit the app, open Wi-Fi settings, select your robot, then return to the app.
Select the 2.4 GHz network if multiple Wi-Fi networks are available.
Ensure phone is on 2.4GHz, avoid VPNs, and disable Wi-Fi isolation.
Access user guides and other downloadable resources for the Shark robot.
Links to customer support, product FAQs, manuals, tips, and videos.
Links to other relevant user guides and manuals for related products.
