NOTE: All accessories attach to either the wand or the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, place foot on floor
nozzle and tilt handle back.
Press power button to turn on vacuum.
Please note the brushrolls will not spin
unless the wand is reclined.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushrolls are spinning and working as they should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum o and remove any blockages
in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn o your vacuum and wait for it
to cool down. After vacuum has cooled, move surface selector switch to Thick Carpet/Area
Rug mode, then press Power button to turn vacuum back on.
Press the Wand Release button to detach the
wand from the pod.
Thick Carpet & Area Rug Cleaning
Set surface selector to Thick Carpet/Area Rug.
Carpet & Low Pile Cleaning
Set surface selector to Carpet/Low Pile to increase the
speed of your brushrolls and to help remove stuck-on dust
and debris.
Hard Floor Cleaning
Set surface selector to Hard Floor.
With pod removed, press the Wand Release
button to detach the wand from the floor
nozzle.
Press the Handle Release latch to detach the
handle from the wand.
Press the Lift-Away button to detach the pod
from the floor nozzle.
UPRIGHTPOWER SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—HANDLE
LIFT-AWAY®
ABOVE-FLOOR—WAND
SURFACE SELECTOR
LIFT-AWAY®
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please set to Carpet/Low Pile. NOTE: For
particularly stubborn stuck-on dust messes, set to Carpet/Low Pile mode.
To Next Page
Loading...
Need help?
General
