13sharkclean.co.uk12 sharkclean.co.uk
USING YOUR VACUUM
CONTROLS AND CLEANING MODES
Press the
button on the UI Screen to
turn on power� To turn o power, press
the button again� To toggle between ECO,
DETECT, and BOOST modes, press the
mode selection button�
POWER
When upright, the nozzle will lock to allow
for freestanding storage when the hand vac
is detached� Place your foot on the nozzle to
disengage the lock to begin floor cleaning�
UPRIGHT
BATTERY REMOVAL
REMOVING THE BATTERY
For quick and easy short-term storage, attach the hand vacuum to the wand by placing it
onto the pre-assembled wand storage clip�
To remove the battery from the hand vacuum,
press the release tab on the battery cap and
slide out the battery� To reinstall, slide the
battery into the compartment in the handle
until it clicks into place�
BATTERY
When the Detect Pro™ Indicator light is blue,
this means no heavy debris is detected and
suction power is normal� When the vacuum
senses heavy debris, the light will turn red, and
suction will increase for more cleaning power�
When the indicator light turns amber, debris
is being removed—continue cleaning until the
indicator turns blue again�
When an edge is detected, the headlights
will illuminate the edge to focus on
targeted debris�
CLEAN INDICATOR EDGE INDICATOR
STORAGE ON THE GO (IW1000 SERIES)
To Next Page
Loading...
Need help?
General
